Browse TRAIL Inventories

An experimental study of a method for designing fuselage side air inlets for high performance at transonic and low supersonic speeds

Effects of free-flight rocket-model booster-adapter configurations on the aerodynamic characteristics in pitch and sideslip of a swept-wing fighter airplane model at a Mach number of 2.01

Ignition-delay determinations of furfuryl alcohol and mixed butyl mercaptans with various white fuming nitric acids using modified open-cup and small-scale rocket engine apparatus

Flight investigation of pentaborane fuel in 9.75-inch-diameter ram-jet engine at low equivalence ratio

Investigation at Mach numbers of 1.41, 1.61, and 1.82 of two variable-geometry inlets having two-dimensional compression surfaces

Investigation at supersonic speeds of external-drag effects and pumping characteristics of a short ejector

A theory for predicting the flow of real gases in shock tubes with experimental verification

Turboprop-engine design considerations II : design requirements and performance of turboprop engines with a single-spool high-pressure-ratio compressor

The use of metallic inhibitors for eliminating mass transfer and corrosion in nickel and nickel alloys by molten sodium hydroxide

Turbojet engine investigation of effect of thermal shock induced by external water-spray cooling on turbine blades of five high-temperature alloys

Turboprop-engine design considerations I : effect of mode of engine operation on performance of turboprop engine with current compressor pressure ratio

Transonic wind-tunnel investigation of the effects of external stores and store position on the aerodynamic characteristics of a 1/16-scale model of the Douglas D-558-II research airplane

Transonic wind-tunnel investigation of the effects of taper ratio and body indentation on the aerodynamic loading characteristics of a 45 degree sweptback wing in the presence of a body

Tank investigation of the hydrodynamic characteristics of a 1/3.33-scale jet-powered dynamic model of the Martin XP6M-1 flying boat with a revised forebody planing bottom : TED No. NACA DE 385

Altitude component performance of the YJ73-GE-3 turbojet engine

Turbulent-heat-transfer measurements at a Mach number of 2.06

Turbulent-heat-transfer measurements at a Mach number of 0.87

Additional experimental heat-transfer and durability data on several forced-convection, air-cooled, strut-supported turbine blades of improved design

Adaptation of Combustion Principles to Aircraft Propulsion, Volume 1, Basic Considerations in the Combustion of Hydrocarbon Fuels with Air

Additional comparisons between computed and measured transonic drag-rise coefficients at zero lift for wing-body-tail configurations

Aerodynamic and hydrodynamic characteristics of models of some aircraft-towed mine-sweeping devices : TED No. NACA AR 8201

Aerodynamic characteristics and pressure distributions of a 6-percent-thick 49 degree sweptback wing with blowing over half-span and full-span flaps

Additional measurements of the low-speed static stability of a configuration employing three triangular wing panels and a body of equal length

Theoretical investigation of the effects of configuration changes on the center of pressure shift of a body-wing-tail combination due to angle of attack and Mach number at transonic and supersonic speeds

A limited flight investigation of the effect of dynamic vibration absorbers on the response of an airplane structure during buffeting

A limited analysis of buffeting experienced in flight by a North American F-86A-1 airplane with and without large external fuel tanks

Low-speed study of the effects of frequency on the stability derivatives of wings oscillating in yaw with particular reference to high angle of attack conditions

Low-speed wind-tunnel investigation of leading-edge porous suction on a 4-percent-thick 60 degree delta wing

Minimum-drag bodies of revolution in a nonuniform supersonic flow field

Model ditching investigation of the Boeing 707 jet transport

Modified tubular combustor as high-temperature gas generators

Stability and control characteristics obtained during demonstration of the Douglas X-3 research airplane

Some aspects of the design of hypersonic boost-glide aircraft

Performance of a high-solidity high-pressure-ratio transonic rotor

Performance measurements from a rocket-powered exploratory research missile flown to a Mach number of 10.4

Pressure-drop characteristics of a 22-segment mock-up of the General Electric Company air-cooled aircraft reactor

The pressure-recovery and propeller-force characteristics of a propeller-spinner-cowling combination employing NACA 4-(5) (05)-037 six- and eight-blade dual-rotation propellers with an NACA 1 series D-type cowl

Stall and flame-out resulting from firing of armament

Stability and drag characteristics of 1/10-scale model of the Convair XF2Y-1 airplane with open inlets containing boundary layer splitter plates as obtained in free flight at Mach numbers between 0.7 and 1.5 : TED No. NACA DE 365

Engine performance of precision-forged, electropolished and machined blades of Nimonic 80 and 80A alloys

Experimental drag coefficients of round noses with conical windshields at Mach number 2.72

Effect of inlet-air baffles on rotating-stall and stress characteristics of an axial-flow compressor in a turbojet engine

Effect of inlet flow distortion on compressor stall and acceleration characteristics of a J65-B-3 turbojet engine

The effect of inlet installation on the zero-lift drag of a 60 degree delta-wing-body configuration from flight tests at Mach numbers from 0.8 to 1.86

A flight investigation at transonic speeds of a model having a triangular wing of aspect ratio 2

A flight investigation at transonic speeds of a model having a triangular wing of aspect ratio 3

Effect of surface-active additives on physical properties of slurries of vapor-process magnesium

Design procedure for transpiration-cooled strut-supported turbine rotor blades

An air-borne target simulator for use in optical sight tracking studies

Investigation of the effects of bomb-bay configuration upon the aerodynamic characteristics of a body with circular cross section at supersonic speeds


Published Year

Subject

Author

‹‹ previous 1 2 ... 83 84 85 86 87 88 89 ... 143 144 next ››