Browse TRAIL Inventories

A Theory of Conductivity of Cold-Worked Copper

Theoretical and Experimental Investigation of Condensation of Air in Hypersonic Wind Tunnels

Method for Analyzing Indeterminate Structures Stressed Above Proportional Limit

Numerical Determination of Indicial Lift of a Two-Dimensional Sinking Airfoil at Subsonic Mach Numbers From Oscillatory Lift Coefficients With Calculations for Mach Number 0.7

Approximate Calculation of Turbulent Boundary-Layer Development in Compressible Flow

Rectangular-Wind-Tunnel Blocking Corrections Using the Velocity-Ratio Method

Viscosities of Air and Nitrogen at Low Pressures

On the Application of Mathieu Functions in the Theory of Subsonic Compressible Flow Past Oscillating Airfoils

Discrepancies Between Theoretical and Observed Behavior of Cyclically Loaded Bearings

The Hydrodynamic Lubrication of Cyclically Loaded Bearings

A Study of Second-Order Supersonic-Flow Theory

Lift and Pitching Derivatives of Thin Sweptback Tapered Wings with Streamwise Tips and Subsonic Leading Edges at Supersonic Speeds

Estimation of Low-Speed Lift and Hinge-Moment Parameters for Full-Span Trailing-Edge Flaps on Lifting Surfaces With and Without Sweepback

Flexural Fatigue Strengths of Riveted Box Beams - Alclad 14S-T6, Alclad 75S-T6, and Various Tempers of Alclad 24S

Mathematical Improvement of Method for Computing Poisson Integrals Involved in Determination of Velocity Distribution on Airfoils

On Reflection of Shock Waves from Boundary Layers

On the Spectrum of Isotropic Turbulence

Elastic Constants for Corrugated-Core Sandwich Plates

Effect of Stress-Solvent Crazing on Tensile Strength of Polymethyl Methacrylate

Skin-Temperature Telemeter for Determining Boundary-Layer Heat-Transfer Coefficients

Studies on Von Kármán's Similarity Theory and Its Extension to Compressible Flows: A Critical Examination of Similarity Theory for Incompressible Flows

Resolution of Annealing Experiments for the Study of Nonequilibrium States

Secondary Flows in Annular Cascades and Effects on Flow in Inlet Guide Vanes

Effect of Fuel Volatility on Performance of Tail-Pipe Burner

Supersonic Tunnel Investigation by Means of Inclined-Plate Technique to Determine Performance of Several Nose Inlets Over Mach Number Range of 1.72 to 2.18

Studies of Von Kármán's Similarity Theory and Its Extension to Compressible Flows: A Similarity Theory for Turbulent Boundary Layer Over a Flat Plate in Compressible Flow

Studies of Von Kármán's Similarity Theory and Its Extension to Compressible Flow: Investigation of Turbulent Boundary Layer Over a Flat Plate in Compressible Flow by the Similarity Theory

Survey of Available Information on Internal Flow Losses Through Axial Turbomachines

Secondary Stresses in Thin-Walled Beams With Closed Cross Sections

Methods for Connection to Revolving Thermocouples

Performance of a Cascade in an Annular Vortex-Generating Tunnel Over Range of Reynolds Numbers

Application of Variational Methods to Transonic Flows With Shock Waves

Investigations of Slot Configurations for Film-Cooled Turbine Blades by Flow Visualization Methods

Deflections of a Simply Supported Rectangular Sandwich Plate Subjected to Transverse Loads

Limits of Flammability of Pure Hydrocarbon-Air Mixtures at Reduced Pressures and Room Temperature

Investigation of the Structural Damping of a Full-Scale Airplane Wing

Effects of Wing Position and Horizontal-Tail Position on the Static Stability Characteristics of Models With Unswept and 45 Degree Sweptback Surfaces With Some Reference to Mutual Interference

Effect of Angle of Attack and Exit Nozzle Design on the Performance of a 16-Inch Ram Jet at Mach Numbers From 1.5 to 2.0

Hydrodynamic Investigation of a Series of Hull Models Suitable for Small Flying Boats and Amphibians

Generalized Linearized Conical Flow

Flight Investigation of the Effect of Atmospheric Turbulence on the Climb Performance of an Airplane

A Flight Investigation of the Effect of Center-of-Gravity Location on Gust Loads

Study of Vortex Shedding as Related to Self-Excited Torsional Oscillations of an Airfoil

Theoretical and Experimental Investigation of Additive Drag

Some Effects of Blade Trailing-Edge Thickness on Performance of a Single-Stage Axial-Flow Compressor

Review of Problems of Conservation of Strategic Materials for Turbine Engines

Observations on Bauschinger Effect in Copper and Brass

Tensile Fracturing Characteristics of Several High-Temperature Alloys as Influenced by Orientation in Respect to Forging Direction

On the Attached Curved Shock in Front of a Sharp-Nosed Axially Symmetrical Body Placed in a Uniform Stream

Review of Current and Anticipated Lubricant Problems in Turbojet Engines


Published Year

Subject

Author

‹‹ previous 1 2 ... 24 25 26 27 28 29 30 ... 143 144 next ››